
Silent air compressor build
Needed a silent compressor for light airbrushing in my apartment but any compressor i found is incredibly loud. Found instructions online to combine a fridge compressor and a tank from a damaged air compressor. Cut off switch and intake tube mounted sideways to make room for the plate. All the holes are marked out and drilled and test for height of hoses. Compressor itself had only copper tubes so had to find connectors that fit over these. Also left the current oil inside si

Facehugger build and paint
o Prints came out amazing since I switched over to simplify3D. this is .12 layer height. Changed the original model and mixed the tail in with a egg model I had and a topographical map from somewhere to fill the hold up. too awhile to figure out a nice combination of colors as you can see in the last photo. Sprayed it with tracker yellow spray paint and gave it a black wash. Came out heavy but I really like the effect it had. Learned a interesting side effect if you spray wro

Zelda Master Sword Build( Completed)
This will be my build log of an amazing 3D model of the legend of Zelda Master Sword from a great artist at https://www.myminifactory.com/object/7579 also hoping to do the sheath as well later. Materials Needed: Filler Primer Triple 000 steel wool. regular steel wool. Aluminum Foil tape the wider the better. Mat black spray paint. Masking tape Seran wrap to cover parts you don't want to get paint on. mat clear coat spray Blue spray paint Gold spray or yellow acrylic for the j

Prosthetic Drill Arm
I was talking with a gentleman at the hackspace that came to see the area and had a prosthetic arm and we got talking about making custom hands like iron man or hulk hands and such and he was really interested so as a surprise and to practice I am making a Bioshock Big Daddy drill attachment for him. Printing off of the gears for the drill attachment. noticed a few mistakes such as I forgot to adjust for the screw size so it gets in the way of the gear but I made the gear sep

Infinity orb Build.
The Body turned out amazing on the printer. there are 6 parts total. these are my modified version of the orb with led and slots to add magnets. #Props #3dprint #infinityorb #guardiansofthegalaxy